Resources

Store Info

Manufacturers

Best sellers

RC Modules / Discharge Networks

Discharge Networks or RC Modules (Specific Resistance and Capacitance values) are required for general standards like IEC 61000-4-2, SAE J113 and industry specific standards like ISO 10605. Resistance is referred to in ohms (Ω), Capacitance is referred to in picofarad (pF or "puff"). The most commonly used Discharge Network is for IEC 61000-4-2 ...

Discharge Networks or RC Modules (Specific Resistance and Capacitance values) are required for general standards like IEC 61000-4-2, SAE J113 and industry specific standards like ISO 10605. Resistance is referred to in ohms (Ω), Capacitance is referred to in picofarad (pF or "puff"). The most commonly used Discharge Network is for IEC 61000-4-2 and ISO 10605, expressed as 330pF/330Ω. There are over 50 combinations of Resistance & Capacitance depending on the standards and the applicable electronics.

More

RC Modules / Discharge Networks There are 36 products.

Subcategories

  • Standard (150pF/330Ohm)

    The discharge network supplied with every standard ESD gun package is the 150pF, 330 Ohm resistance/capacitance module used to meet IEC 61000-4-2, RTCA/DO-160, MIL-STD-461G CS118, ITU-T K20, ISO 10605, IEC 60601 and others. If you are obtaining the CE Mark or other general product compliance certification, this is the network used.

  • Automotive (150/330pF & 330/2000Ohm)

    Automotive test standards ISO 10605 and SAE J113/13 are a 4 network combination of resistance (330/2K Ohm) and capacitance (150/330 pF) values. All major automotive manufacturers have specified electromagnetic compliance standards such as the Ford FMC1278, GMW 3100, and many more that reference one of the international standards. 

  • MIL-STD-331, Munitions & Fuzes (500pF, 500/5000Ohm)

    Resistance and Capacitance modules are found in many Military and DOD electrostatic immunity test requirements, many of which refer back to MIL-STD-331. The 500pF, 500 and 5000 Ohm discharge networks are suitable to meet STANAG 4239, MIL-DTL-23659D and MIL-STD-1512.

  • 100pF/1500Ohm (Human Body Model - HBM)

    Human Body Model (HBM) ESD testing is a requirement in compliance standards IEC 612340-3-1, JEDEC 11-A114, MIL-STD-750D and many more. RC modules with 150pF capacitance and 1500 Ohm resistance values are typically used with 30kV model ESD simulators and their easily interchangeable discharge network design. The new Haefely ONYX 30 and 3ctest EDS 20T are 16kV models with easily changeable RC modules, saving users money on the overall HBM and MM configuration

  • 200pF/0Ohm (Machine Model - MM)

    Machine Model (MM) ESD testing is a requirement in compliance standards IEC 612340-3-2, JEDEC 11-A115, and many more. RC modules with 200pF capacitance and zero Ohm resistance values are typically used with 30kV model ESD simulators and their easily interchangeable discharge network design. The new Haefely ONYX 16 and 3ctest EDS 20T are 16kV models with easily changeable RC modules, saving users money on the overall HBM and MM configuration

  • Special Applications

    Unique and unusual electrostatic immunity test standards can call for a variety of resistance and capacitance combinations. These applications can be commercial, military, avionic or another. 

per page
Showing 1 - 10 of 36 items
Showing 1 - 10 of 36 items